PartsTable TECHNICAL DATA SHEET
NSN 5310-00-434-3519Government record, cited

Washer, Flat5310-00-434-3519

NSN 5310-00-434-3519 · NIIN 004343519 · Part number A51M20503-13
Northrop Grumman Systems Corporation · FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives · CAGE 79RG9
Government record, cited
NSN 5310-00-434-3519 — this item is cataloged by the U.S. Government under National Stock Number 5310-00-434-3519. Manufacturer of record part number: A51M20503-13.
Also searched as  5310-00-434-3519 · 5310004343519 · NIIN 004343519 · 00-434-3519 · FSC 5310 Nuts and Washers · CAGE 79RG9 · A51M20503-13
Nearby stock numbers  ·
Features
  • Washer,flat — FSC 5310
  • Overall Diameter: 1.300 INCHES NOMINAL IN
  • Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
  • Material Document and Classification: MIL-S-6758,COND D1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Cross-Sectional Shape Style: RECTANGULAR
  • Surface Treatment: PASSIVATE OVERALL
  • Minimum Tensile Strength: 125000 POUNDS PER SQUARE INCH LBS
  • Peripheral Shape Style: ROUND
Identification
  • NSN: 5310-00-434-3519
  • NIIN: 004343519
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: A51M20503-13
  • Manufacturer: Northrop Grumman Systems Corporation
General Description

The Washer,flat, cataloged under National Stock Number 5310-00-434-3519, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-434-3519
Primary Part NumberA51M20503-13
Item NameWasher,flat
FSC / FSG5310 / 53 — Nuts and Washers
ManufacturerNorthrop Grumman Systems Corporation
StatusACTIVE
Overall Diameter1.300 INCHES NOMINAL IN
Hardness Rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
Material Document and ClassificationMIL-S-6758,COND D1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Cross-Sectional Shape StyleRECTANGULAR
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength125000 POUNDS PER SQUARE INCH LBS
Peripheral Shape StyleROUND
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialSTEEL COMP 4130 OVERALL
Center Hole Shape StyleROUND
Hole Diameter0.684 INCHES NOMINAL IN
Thickness0.040 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
A51M20503-13 PRIMARY Northrop Grumman Systems Corporation (USA)
Reference documents
ReferenceMeaning
A51M20503-13 5/9 Secondary reference
Northrop Grumman Systems Corporation
A51M20503-13 3/9 Design control — primary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040
5310-00-000-0040 · Item name not on file
5310-00-000-0077
NUT,PLAIN,ROUND
5310-00-000-0079
WASHER,FLAT
5310-00-000-0079
WASHER,FLAT
5310-00-000-1146
5310-00-000-1146 · Item name not on file
5310-00-000-3815
5310-00-000-3815 · Item name not on file
5310-00-000-4532
5310-00-000-4532 · Item name not on file
5310-00-000-4540
5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-00-434-3519?

NSN 5310-00-434-3519 is a Washer,flat, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5310, Nuts and Washers. Status: active.

What part numbers are listed for NSN 5310-00-434-3519?

NSN 5310-00-434-3519 has 1 manufacturer part number on file: A51M20503-13 (Northrop Grumman Systems Corporation).

What are the specifications of A51M20503-13?

Key specifications for A51M20503-13: Overall Diameter: 1.300 INCHES NOMINAL IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM; Material Document and Classification: MIL-S-6758,COND D1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; Cross-Sectional Shape Style: RECTANGULAR. 12 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-434-3519 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com