The Nut,self-Locking,assembled Washe, cataloged under National Stock Number 5310-00-402-5711, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-402-5711 |
| Primary Part Number | GN512AW3D |
| Item Name | Nut,self-Locking,assembled Washe |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Washer Outside Diameter | 0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN |
| Width Across Flats | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN |
| Bearing Surface Finish | 125.0 MICROINCHES |
| Surface Treatment Document and Classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE WASHER |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| Thread Series | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Temp Rating | 250.0 FAHRENHEIT MAXIMUM DEGF |
| Material Document and Classification | QQ-A-225/6,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/13,T6 FED SPEC 2ND MATERIAL RESPONSE WASHER |
| Material Document and Classification | AMS 5024 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5020 ASSN STD 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6323 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6325 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6327 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6358 ASSN STD 3RD MATERIAL RESPONSE NUT |
| Nut Counterbore Depth | 0.141 INCHES MINIMUM AND 0.161 INCHES MAXIMUM NUT IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Counterbore Diameter | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM NUT IN |
| Locking Feature | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| Surface Treatment | CADMIUM AND CHROMATE NUT |
| Surface Treatment | CHROMATE WASHER |
| Nut Style | FLAT WITH TURNED BACK EDGE |
| Thread Class | 3B |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 1137 OR STEEL COMP 11L37 OR STEEL COMP 8740 NUT |
| Material | PLASTIC NYLON LOCKING INSERT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| GN512AW3D | Northrop Grumman Systems Corporation (USA) |
| CR-5937 | Alcoa Global Fasteners, Inc Dba Simmonds Mecaero Fas Pdts Div Simmonds Mecaero Fas Pdts (USA) |
| F12N7699-1032 | Greer Stop Nut, Inc. (USA) |
| Reference | Meaning |
|---|---|
| MS21224-3 | 3/2 Design control — primary reference U.S. Government activity |
| MS21224-3 | 5/9 Secondary reference U.S. Government activity |
| NE8235-3 | 5/9 Secondary reference Harvard Industries Inc |
NSN 5310-00-402-5711 is a Nut,self-Locking,assembled Washe, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5310, Nuts and Washers. Status: active.
NSN 5310-00-402-5711 has 3 manufacturer part numbers on file: GN512AW3D (Northrop Grumman Systems Corporation), CR-5937 (Alcoa Global Fasteners, Inc Dba Simmonds Mecaero Fas Pdts Div Simmonds Mecaero Fas Pdts), F12N7699-1032 (Greer Stop Nut, Inc.).
1 possible match (shared part number, not a government interchangeability claim): 5310-01-463-8956. Verify interchangeability with system specifications before substitution.
Key specifications for GN512AW3D: Overall Height: 0.334 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN; Washer Outside Diameter: 0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN; Width Across Flats: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN; Bearing Surface Finish: 125.0 MICROINCHES. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.