The Nut,plain,round, cataloged under National Stock Number 5310-00-350-4716, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-350-4716 |
| Item Name | Nut,plain,round |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Thread Series | UNEF |
| Thread Pitch Diameters | +1.0889 TO 1.0925 INCHES IN |
| Material Document and Classification | MIL-T-3520 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Drive Point Width | 0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.125 INCHES IN |
| Nut Diameter | 1.580 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN |
| Drive Point Depth | 0.100 INCHES NOMINAL IN |
| Nut Thickness | 0.360 INCHES NOMINAL IN |
| Small End Diameter | 1.385 INCHES NOMINAL IN |
| Surface Treatment | PHOSPHATE OVERALL |
| Drive Point Quantity | 8 |
| Thread Quantity Per Inch | 18 |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 360598S | 5/9 Secondary reference Ford Motor Company |
| 360598S | 5/9 Secondary reference Ford Motor Co Ford Parts and Service Div Government Part Sales |
| 360587S | 3/9 Design control — primary reference Ford Motor Company |
| 360587S | 5/9 Secondary reference Ford Motor Co Ford Parts and Service Div Government Part Sales |
NSN 5310-00-350-4716 is a Nut,plain,round, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-350-4716: Thread Series: UNEF; Thread Pitch Diameters: +1.0889 TO 1.0925 INCHES IN; Material Document and Classification: MIL-T-3520 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; Drive Point Width: 0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.