The Nut,sleeve, cataloged under National Stock Number 5310-00-176-6099, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-176-6099 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Flange Diameter | 0.1397 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN |
| Nut Length | 0.117 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | 102-104-0001,FSCM 77045 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Flange Thickness | 0.073 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN |
| Thread Series | UNIFIED NATIONAL COARSE (UNC) |
| Material Document and Classification | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.086 INCHES IN |
| Nut Diameter | 0.1258 INCHES MINIMUM AND 0.1261 INCHES MAXIMUM IN |
| Cross-Sectional Shape | ROUND FLANGE |
| Cross-Sectional Shape | ROUND NUT |
| Surface Treatment | PASSIVATE OVERALL |
| Nut Style | SLEEVE |
| Thread Class | 2B |
| Thread Quantity Per Inch | 56 |
| Material | STEEL COMP 303 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2-327-50005 | 5/9 Secondary reference Moog Inc. Dba Moog Components Group |
| 2-327-50005 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-176-6099 is a Nut,sleeve, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-176-6099: Flange Diameter: 0.1397 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM IN; Nut Length: 0.117 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Surface Treatment Document and Classification: 102-104-0001,FSCM 77045 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Flange Thickness: 0.073 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.