The Washer,recessed, cataloged under National Stock Number 5310-00-119-6485, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-119-6485 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Top Recess Diameter | 0.677 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | E.S.6.18.2.1.2,FSCM 03481 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Bottom Recess Diameter | 0.677 INCHES NOMINAL IN |
| Heat Treatment | QUENCHED AND TEMPERED |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| Top Recess Angle | 90.0 DEGREES NOMINAL |
| Style Designator | RECESSED BOTH SIDES |
| Material Document and Classification | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 0.928 INCHES NOMINAL IN |
| Material Thickness | 0.188 INCHES NOMINAL IN |
| Bottom Recess Angle | 90.0 DEGREES NOMINAL |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL COMP 4130 OVERALL |
| Hole Diameter | 0.568 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 80-504-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-119-6485 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 7910-01-345-6793. Verify interchangeability with system specifications before substitution.
Key specifications for 5310-00-119-6485: Top Recess Diameter: 0.677 INCHES NOMINAL IN; Surface Treatment Document and Classification: E.S.6.18.2.1.2,FSCM 03481 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Bottom Recess Diameter: 0.677 INCHES NOMINAL IN; Heat Treatment: QUENCHED AND TEMPERED. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.