The Nut,sleeve, cataloged under National Stock Number 5310-00-115-6317, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-115-6317 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Flange Diameter | 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Nut Length | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL EXCEPT THREADS |
| Flange Thickness | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Thread Series | UNIFIED NATIONAL COARSE (UNC) |
| Hardness Rating | 23.0 ROCKWELL C MAXIMUM |
| Material Document and Classification | AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Nut Diameter | 0.4375 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN |
| Cross-Sectional Shape | ROUND FLANGE |
| Cross-Sectional Shape | ROUND NUT |
| Cross-Sectional Shape | ROUND BOSS |
| Surface Treatment | OXIDE OVERALL EXCEPT THREADS |
| Countersink Angle | 90.0 DEGREES NOMINAL NUT |
| Nut Style | SLEEVE |
| Thread Class | 3B |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 4140 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2-070-022-01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-115-6317 is a Nut,sleeve, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-115-6317: Flange Diameter: 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Nut Length: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL EXCEPT THREADS; Flange Thickness: 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.