The Washer,recessed, cataloged under National Stock Number 5310-00-113-6236, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-113-6236 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Top Recess Diameter | 2.068 INCHES MINIMUM AND 2.073 INCHES MAXIMUM IN |
| Bottom Recess Diameter | 2.068 INCHES MINIMUM AND 2.073 INCHES MAXIMUM IN |
| Heat Treatment | COLD DRAWN FULL HARD CONDITION |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM |
| Top Recess Angle | 90.0 DEGREES NOMINAL |
| Style Designator | RECESSED BOTH SIDES |
| Outside Diameter | 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN |
| Material Thickness | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN |
| Bottom Recess Angle | 90.0 DEGREES NOMINAL |
| Material | STEEL OVERALL |
| Hole Diameter | 2.006 INCHES MINIMUM AND 2.011 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 151671 | 3/9 Design control — primary reference Franklin Electric Co Inc |
NSN 5310-00-113-6236 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 3020-01-252-0822. Verify interchangeability with system specifications before substitution.
Key specifications for 5310-00-113-6236: Top Recess Diameter: 2.068 INCHES MINIMUM AND 2.073 INCHES MAXIMUM IN; Bottom Recess Diameter: 2.068 INCHES MINIMUM AND 2.073 INCHES MAXIMUM IN; Heat Treatment: COLD DRAWN FULL HARD CONDITION; Hardness Rating: 30.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.