The Washer,lock, cataloged under National Stock Number 5310-00-104-7755, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 7 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-104-7755 |
| Item Name | Washer,lock |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Treatment Document and Classification | QQ-Z-325 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Style Designator | FLAT EXTERNAL TEETH |
| Outside Diameter | 0.680 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN |
| Material Thickness | 0.035 INCHES NOMINAL IN |
| Surface Treatment | ZINC OVERALL |
| Material | STEEL OVERALL |
| Hole Diameter | 0.384 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| X00226 | 5/9 Secondary reference Teledyne Continental Motors Industrial Products Div Teledyne Industries Inc Sub of Teledyne Inc |
| X226 | 3/9 Design control — primary reference Teledyne Continental Motors Industrial Products Div Teledyne Industries Inc Sub of Teledyne Inc |
NSN 5310-00-104-7755 is a Washer,lock, classified under FSC 5310, Nuts and Washers. Status: active.
4 possible matches (shared part number, not a government interchangeability claim): 6685-00-731-1782, 5110-00-953-6303, 5310-01-620-7727. Verify interchangeability with system specifications before substitution.
Key specifications for 5310-00-104-7755: Surface Treatment Document and Classification: QQ-Z-325 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Style Designator: FLAT EXTERNAL TEETH; Outside Diameter: 0.680 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN; Material Thickness: 0.035 INCHES NOMINAL IN. 7 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.