The Nut,sleeve, cataloged under National Stock Number 5310-00-098-8014, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-098-8014 |
| Item Name | Nut,sleeve |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Flange Diameter | 1.500 INCHES NOMINAL IN |
| Nut Length | 0.175 INCHES NOMINAL IN |
| Flange Thickness | 0.060 INCHES NOMINAL IN |
| Thread Series | UNEF |
| Hole Configuration Style | CONFIGURATION J |
| Material Document and Classification | FM 10001,FSCM 24446 MFR REF 2ND MATERIAL RESPONSE LOCKING INSERT |
| Material Document and Classification | QQ-A-268 FED SPEC 1ST MATERIAL RESPONSE NUT |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.000 INCHES IN |
| Nut Diameter | 1.194 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN |
| Cross-Sectional Shape | ROUND FLANGE |
| Cross-Sectional Shape | ROUND NUT |
| Drilled Hole Diameter | 0.191 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Nut Style | SLEEVE |
| Thread Class | 3B |
| Thread Quantity Per Inch | 20 |
| Material | ALUMINUM ALLOY 2024 NUT |
| Material | PLASTIC POLYAMIDE NYLON LOCKING INSERT |
| Hole Type and Quantity | 2 DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 348204 | 3/2 Design control — primary reference U.S. Government activity |
| 5310PL0797920 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5310-00-098-8014 is a Nut,sleeve, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-098-8014: Flange Diameter: 1.500 INCHES NOMINAL IN; Nut Length: 0.175 INCHES NOMINAL IN; Flange Thickness: 0.060 INCHES NOMINAL IN; Thread Series: UNEF. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.