PartsTable TECHNICAL DATA SHEET
NSN 5310-00-061-4718Government record, cited

Nut, Plain, Assembled Washer5310-00-061-4718

NSN 5310-00-061-4718 · NIIN 000614718
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-00-061-4718 · 5310000614718 · NIIN 000614718 · 00-061-4718 · FSC 5310 Nuts and Washers · 9770-9 · MS21244-9 · MS21244-9 · FF-N-836E
Nearby stock numbers  ·
Features
  • Nut,plain,assembled Washer — FSC 5310
  • Washer Outside Diameter: 1.050 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
  • Width Across Flats: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
  • Bearing Surface Finish: 125.0 MICROINCHES
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER
  • Surface Treatment Document and Classification: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
  • Thread Series: UNIFIED NATIONAL JOINT FINE (UNJF)
  • Temp Rating: 450.0 FAHRENHEIT MAXIMUM DEGF
Identification
  • NSN: 5310-00-061-4718
  • NIIN: 000614718
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Nut,plain,assembled Washer, cataloged under National Stock Number 5310-00-061-4718, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-061-4718
Item NameNut,plain,assembled Washer
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Washer Outside Diameter1.050 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
Width Across Flats0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
Bearing Surface Finish125.0 MICROINCHES
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER
Surface Treatment Document and ClassificationQQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
Thread SeriesUNIFIED NATIONAL JOINT FINE (UNJF)
Temp Rating450.0 FAHRENHEIT MAXIMUM DEGF
Nut Counterbore Depth0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM NUT IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.562 INCHES IN
Counterbore Diameter0.676 INCHES MINIMUM AND 0.686 INCHES MAXIMUM NUT IN
Surface TreatmentCADMIUM AND CHROMATE NUT
Surface TreatmentPASSIVATE WASHER
Nut StyleFLAT WITH TURNED BACK EDGE
Thread Class3B
Thread Quantity Per Inch18
MaterialSTEEL NUT
MaterialSTEEL COMP 302 OR STEEL COMP 321 WASHER
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5826-00-888-7912 POSSIBLE MATCH
POINTER ASSEMBLY,DI
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
9770-9 5/9 Secondary reference
Harvard Industries Inc
MS21244-9 3/2 Design control — primary reference
U.S. Government activity
MS21244-9 5/9 Secondary reference
U.S. Government activity
FF-N-836E 4/1 Identification reference
U.S. Government activity
Related Parts
5826-00-888-7912POSSIBLE MATCH
POINTER ASSEMBLY,DI

Frequently Asked Questions

What is NSN 5310-00-061-4718?

NSN 5310-00-061-4718 is a Nut,plain,assembled Washer, classified under FSC 5310, Nuts and Washers. Status: active.

What NSN replaces 5310-00-061-4718?

1 possible match (shared part number, not a government interchangeability claim): 5826-00-888-7912. Verify interchangeability with system specifications before substitution.

What are the specifications of 5310-00-061-4718?

Key specifications for 5310-00-061-4718: Overall Height: 0.630 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN; Washer Outside Diameter: 1.050 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN; Width Across Flats: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN; Bearing Surface Finish: 125.0 MICROINCHES. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-061-4718 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com