The Washer,recessed, cataloged under National Stock Number 5310-00-059-8726, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5310-00-059-8726 |
| Item Name | Washer,recessed |
| FSC / FSG | 5310 / 53 — Nuts and Washers |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES ALL SURFACES |
| Top Recess Diameter | 0.546 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Bottom Recess Diameter | 0.546 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN |
| Top Recess Angle | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| Style Designator | RECESSED BOTH SIDES |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Outside Diameter | 0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM IN |
| Material Thickness | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Bottom Recess Angle | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Material | STEEL COMP H11 OVERALL |
| Hole Diameter | 0.506 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 140-007-33-23A4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5310-00-059-8726 is a Washer,recessed, classified under FSC 5310, Nuts and Washers. Status: active.
Key specifications for 5310-00-059-8726: Surface Finish: 63.0 MICROINCHES ALL SURFACES; Top Recess Diameter: 0.546 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Bottom Recess Diameter: 0.546 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.