PartsTable TECHNICAL DATA SHEET
NSN 5310-00-008-1989Government record, cited

Nut, Plain, Round5310-00-008-1989

NSN 5310-00-008-1989 · NIIN 000081989
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-00-008-1989 · 5310000081989 · NIIN 000081989 · 00-008-1989 · FSC 5310 Nuts and Washers
Nearby stock numbers  ·
Features
  • Nut,plain,round — FSC 5310
  • Thread Series: UNIFIED NATIONAL JOINT (UNJ)
  • Hardness Rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
  • Hole Configuration Style: CONFIGURATION F
  • Material Document and Classification: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Drive Point Width: 0.312 INCHES NOMINAL IN
  • Thread Direction: RIGHT-HAND
  • Nominal Thread Size: 2.250 INCHES IN
Identification
  • NSN: 5310-00-008-1989
  • NIIN: 000081989
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Nut,plain,round, cataloged under National Stock Number 5310-00-008-1989, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-008-1989
Item NameNut,plain,round
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Thread SeriesUNIFIED NATIONAL JOINT (UNJ)
Hardness Rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
Hole Configuration StyleCONFIGURATION F
Material Document and ClassificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Drive Point Width0.312 INCHES NOMINAL IN
Thread DirectionRIGHT-HAND
Nominal Thread Size2.250 INCHES IN
Nut Diameter2.620 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
Drive Point Depth0.105 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
Nut Thickness0.375 INCHES NOMINAL IN
Drilled Hole Diameter0.125 INCHES NOMINAL IN
Drive Point Quantity3
Nut StyleROUND
Thread Class3B
Test Data Document84955-KPS 208 RA7,NG C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch16
MaterialSTEEL COMP 4340 OVERALL
Hole Type and Quantity3 DRILLED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
K641224-11 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040
5310-00-000-0040 · Item name not on file
5310-00-000-0077
NUT,PLAIN,ROUND
5310-00-000-0079
WASHER,FLAT
5310-00-000-0079
WASHER,FLAT
5310-00-000-1146
5310-00-000-1146 · Item name not on file
5310-00-000-3815
5310-00-000-3815 · Item name not on file
5310-00-000-4532
5310-00-000-4532 · Item name not on file
5310-00-000-4540
5310-00-000-4540 · Item name not on file

Frequently Asked Questions

What is NSN 5310-00-008-1989?

NSN 5310-00-008-1989 is a Nut,plain,round, classified under FSC 5310, Nuts and Washers. Status: active.

What are the specifications of 5310-00-008-1989?

Key specifications for 5310-00-008-1989: Thread Series: UNIFIED NATIONAL JOINT (UNJ); Hardness Rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM; Hole Configuration Style: CONFIGURATION F; Material Document and Classification: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-008-1989 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com