PartsTable TECHNICAL DATA SHEET
NSN 5310-00-004-3220Government record, cited

Nut, Plain, Wing5310-00-004-3220

NSN 5310-00-004-3220 · NIIN 000043220
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-00-004-3220 · 5310000043220 · NIIN 000043220 · 00-004-3220 · FSC 5310 Nuts and Washers · FFN845 · MS35426-16
Nearby stock numbers  ·
Features
  • Nut,plain,wing — FSC 5310
  • Body Diameter: 0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Series: UNF
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Hole Configuration Style: CONFIGURATION K
  • Thread Direction: RIGHT-HAND
  • Nominal Thread Size: 0.375 INCHES IN
Identification
  • NSN: 5310-00-004-3220
  • NIIN: 000043220
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Nut,plain,wing, cataloged under National Stock Number 5310-00-004-3220, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-004-3220
Item NameNut,plain,wing
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Body Diameter0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread SeriesUNF
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Hole Configuration StyleCONFIGURATION K
Thread DirectionRIGHT-HAND
Nominal Thread Size0.375 INCHES IN
Departure From Cited DesignatorMATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Nondefinitive Spec/std DataA TYPE AND 2 STYLE
Drilled Hole Diameter0.070 INCHES NOMINAL IN
Surface TreatmentCADMIUM OVERALL
Nut StyleWING
Thread Class2B
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch24
MaterialSTEEL OVERALL
Wing Spread Width1.310 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
Hole Type and Quantity1 DRILLED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5310-00-827-8487 POSSIBLE MATCH
NUT,PLAIN,WING
Possible match (shared part number)
5310-01-080-2211 POSSIBLE MATCH
NUT,PLAIN,WING
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
FFN845 4/1 Identification reference
U.S. Government activity
MS35426-16 4/1 Identification reference
U.S. Government activity
Related Parts
5310-00-827-8487POSSIBLE MATCH
NUT,PLAIN,WING
5310-01-080-2211POSSIBLE MATCH
NUT,PLAIN,WING

Frequently Asked Questions

What is NSN 5310-00-004-3220?

NSN 5310-00-004-3220 is a Nut,plain,wing, classified under FSC 5310, Nuts and Washers. Status: active.

What NSN replaces 5310-00-004-3220?

2 possible matches (shared part number, not a government interchangeability claim): 5310-00-827-8487, 5310-01-080-2211. Verify interchangeability with system specifications before substitution.

What are the specifications of 5310-00-004-3220?

Key specifications for 5310-00-004-3220: Body Diameter: 0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN; Overall Height: 0.650 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNF. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-004-3220 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com