PartsTable TECHNICAL DATA SHEET
NSN 5310-00-003-3888Government record, cited

Nut, Plain, Octagon5310-00-003-3888

NSN 5310-00-003-3888 · NIIN 000033888
FSC 5310 — Nuts and Washers · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5310-00-003-3888 · 5310000033888 · NIIN 000033888 · 00-003-3888 · FSC 5310 Nuts and Washers · A51B20528-11 · A51B20528-11 · A51B20528-11
Nearby stock numbers  ·
Features
  • Nut,plain,octagon — FSC 5310
  • Width Across Flats: 2.375 INCHES NOMINAL IN
  • Bearing Surface Finish: 125.0 MICROINCHES
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Series: UNIFIED NATIONAL JOINT (UNJ)
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
  • Material Document and Classification: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5310-00-003-3888
  • NIIN: 000033888
  • FSC: 5310 — Nuts and Washers
  • FSG: 53 — Hardware and Abrasives
General Description

The Nut,plain,octagon, cataloged under National Stock Number 5310-00-003-3888, is classified within Federal Supply Class 5310 (Nuts and Washers) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5310-00-003-3888
Item NameNut,plain,octagon
FSC / FSG5310 / 53 — Nuts and Washers
StatusACTIVE
Width Across Flats2.375 INCHES NOMINAL IN
Bearing Surface Finish125.0 MICROINCHES
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread SeriesUNIFIED NATIONAL JOINT (UNJ)
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Thread DirectionRIGHT-HAND
Nominal Thread Size1.938 INCHES IN
Nut Height0.312 INCHES NOMINAL IN
Surface TreatmentPASSIVATE OVERALL
Countersink Angle90.0 DEGREES NOMINAL NUT
Nut StylePLAIN, OCTAGON
Thread Class3B
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch12
MaterialSTEEL COMP 630 OVERALL
Bearing Surface TypeCHAMFERED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
A51B20528-11 C/1 Advisory reference — outside the item-of-supply concept
Northrop Grumman Systems Corporation
A51B20528-11 3/9 Design control — primary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
A51B20528-11 5/9 Secondary reference
Northrop Grumman Systems Corporation
No interchangeability data on file.
Other items in FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-001-5340
5310-00-001-5340 · Item name not on file
5310-00-004-4584
5310-00-004-4584 · Item name not on file
5310-00-004-5157
5310-00-004-5157 · Item name not on file
5310-00-004-7045
5310-00-004-7045 · Item name not on file
5310-00-004-7046
WASHER,RECESSED
5310-00-005-4375
NUT,PLAIN,RECTANGULAR
5310-00-006-8067
5310-00-006-8067 · Item name not on file
5310-00-007-2907
5310-00-007-2907 · Item name not on file

Frequently Asked Questions

What is NSN 5310-00-003-3888?

NSN 5310-00-003-3888 is a Nut,plain,octagon, classified under FSC 5310, Nuts and Washers. Status: active.

What are the specifications of 5310-00-003-3888?

Key specifications for 5310-00-003-3888: Width Across Flats: 2.375 INCHES NOMINAL IN; Bearing Surface Finish: 125.0 MICROINCHES; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Series: UNIFIED NATIONAL JOINT (UNJ). 17 specifications are documented in the U.S. Government catalog.

Is NSN 5310-00-003-3888 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com