PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5307W C1
5307W C1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 1.3750 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-961-9214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5307W C1
NSN: 3110-00-961-9214
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width1.3750 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialLUBRICANT
self-alignment_locationINTERNAL
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
NSN3110-00-961-9214
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5307W C1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
ALIGNMENT TYPE: SELF-ALIGNING
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
ALIGNMENT TYPESELF-ALIGNING
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
SELF-ALIGNMENT LOCATIONINTERNAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
LUBRICATION MATERIALLUBRICANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
5307WInterchangeable
interchangeable cross-reference
interchangeable
S1095Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5307W C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5307W C1?
5307W C1 is a BEARING,BALL,ANNULAR.
What parts can replace 5307W C1?
There are 2 known substitutes for 5307W C1: 5307W, S1095. Substitute compatibility should be verified for your specific system.
What is the NSN for 5307W C1?
5307W C1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-961-9214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5307W C1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026