PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5307A2ZHR
5307A2ZHR ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 1.3750 INCHES NOMINAL IN, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-007-7094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5307A2ZHR
NSN: 3110-01-007-7094
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width1.3750 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity2
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-01-007-7094
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5307A2ZHR · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH1.3750 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
SHIELD QUANTITY2
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
CONTACT ANGLE25.0 DEGREES MINIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
BS4-1575P19Interchangeable
interchangeable cross-reference
interchangeable
34-135-1Interchangeable
interchangeable cross-reference
interchangeable
5306Interchangeable
interchangeable cross-reference
interchangeable
5307Interchangeable
interchangeable cross-reference
interchangeable
SKF5307Interchangeable
interchangeable cross-reference
interchangeable
HR5069Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5307A2ZHR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5307A2ZHR?
5307A2ZHR is a BEARING,BALL,ANNULAR.
What parts can replace 5307A2ZHR?
There are 30 known substitutes for 5307A2ZHR: BS4-1575P19, 34-135-1, 5306 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5307A2ZHR?
5307A2ZHR is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-007-7094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5307A2ZHR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026