The Stud,shouldered, cataloged under National Stock Number 5307-01-217-3113, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-01-217-3113 |
| Item Name | Stud,shouldered |
| FSC / FSG | 5307 / 53 — Studs |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OVERALL |
| Nut End Shank Diameter | 0.058 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Thread Length | 0.039 INCHES NOMINAL STUD THREAD IN |
| Thread Length | 0.109 INCHES NOMINAL NUT THREAD IN |
| Style Designator | SHOULDERED |
| Material Document and Classification | ASTM B541-75,COND HT-CW ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 0.060 INCHES NUT THREAD IN |
| Nominal Thread Size | 0.060 INCHES STUD THREAD IN |
| Shoulder Diameter | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Nut End Shank Length | 0.070 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN |
| Thread Class | 2A STUD THREAD A |
| Thread Class | 2A NUT THREAD A |
| Thread Quantity Per Inch | 80 NUT THREAD |
| Thread Quantity Per Inch | 80 STUD THREAD |
| Shoulder Length | 0.024 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN |
| Thread Series Designator | UNF STUD THREAD |
| Thread Series Designator | UNF NUT THREAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 8019046-001 | 3/9 Design control — primary reference Ballistic Missile Office /afsc/ |
NSN 5307-01-217-3113 is a Stud,shouldered, classified under FSC 5307, Studs. Status: active.
Key specifications for 5307-01-217-3113: Surface Finish: 32.0 MICROINCHES OVERALL; Nut End Shank Diameter: 0.058 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; Thread Length: 0.039 INCHES NOMINAL STUD THREAD IN; Thread Length: 0.109 INCHES NOMINAL NUT THREAD IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.