The Stud,recessed and Stepped, cataloged under National Stock Number 5307-00-942-5580, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. The manufacturer of record is Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-00-942-5580 |
| Primary Part Number | 517124 |
| Item Name | Stud,recessed and Stepped |
| FSC / FSG | 5307 / 53 — Studs |
| Manufacturer | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
| Status | ACTIVE |
| Cotter Pin Hole Diameter | 0.062 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE IN |
| Thread Length | 1.000 INCHES MINIMUM AND 1.100 INCHES MAXIMUM NUT THREAD IN |
| Thread Length | 1.000 INCHES MINIMUM AND 1.100 INCHES MAXIMUM STUD THREAD IN |
| Style Designator | RECESSED AND STEPPED |
| Material Document and Classification | AISI310 ASSN STD 1ST MATERIAL RESPONSE AND AMS5613 ASSN STD 2ND MATERIAL RESPONSE AND MS7470 MIL SPEC SINGLE MATERIAL RESPONSE |
| Diameter of Recessed Portion of Shank | 0.240 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 0.312 INCHES STUD THREAD IN |
| Length of Recessed Portion of Shank | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Thread Class | 3A NUT THREAD A |
| Thread Class | 3A STUD THREAD A |
| Thread Quantity Per Inch | 24 STUD THREAD |
| Material | STEEL COMP 310 OR STEEL |
| Thread Series Designator | UNF STUD THREAD |
| Distance From Cotter Pin Hole Centerline to Nut End | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5307-00-942-5580 is a Stud,recessed and Stepped, manufactured by Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney, classified under FSC 5307, Studs. Status: active.
NSN 5307-00-942-5580 has 2 manufacturer part numbers on file: 517124 (Thompson Aerospace, Llc Dba Thompson Aerospace Llc), 517124 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).
1 possible match (shared part number, not a government interchangeability claim): 2805-00-973-4974. Verify interchangeability with system specifications before substitution.
Key specifications for 517124: Cotter Pin Hole Diameter: 0.062 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE IN; Thread Length: 1.000 INCHES MINIMUM AND 1.100 INCHES MAXIMUM NUT THREAD IN; Thread Length: 1.000 INCHES MINIMUM AND 1.100 INCHES MAXIMUM STUD THREAD IN; Style Designator: RECESSED AND STEPPED. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.