The Stud,plain, cataloged under National Stock Number 5307-00-736-9829, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. The manufacturer of record is General Motors Corp. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-00-736-9829 |
| Primary Part Number | 6765905 |
| Item Name | Stud,plain |
| FSC / FSG | 5307 / 53 — Studs |
| Manufacturer | General Motors Corp |
| Status | ACTIVE |
| Cotter Pin Hole Diameter | 0.073 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE IN |
| Thread Length | 0.562 INCHES MINIMUM STUD THREAD IN |
| Thread Length | 0.625 INCHES MINIMUM NUT THREAD IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Thread Pitch Diameters | +0.2820 TO 0.2832 INCHES STUD THREAD IN |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 0.312 INCHES NUT THREAD IN |
| Nominal Thread Size | 0.312 INCHES STUD THREAD IN |
| Thread Class | 2A NUT THREAD A |
| Thread Quantity Per Inch | 24 NUT THREAD |
| Thread Quantity Per Inch | 18 STUD THREAD |
| Material | STEEL |
| Thread Series Designator | UNF NUT THREAD |
| Thread Series Designator | UNS STUD THREAD |
| Distance From Cotter Pin Hole Centerline to Nut End | 0.203 INCHES NOMINAL FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5307-00-736-9829 is a Stud,plain, manufactured by General Motors Corp, classified under FSC 5307, Studs. Status: active.
NSN 5307-00-736-9829 has 2 manufacturer part numbers on file: 6765905 (General Motors Corp), 7369829 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 6765905: Cotter Pin Hole Diameter: 0.073 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE IN; Thread Length: 0.562 INCHES MINIMUM STUD THREAD IN; Thread Length: 0.625 INCHES MINIMUM NUT THREAD IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.