The Stud,shouldered and Stepped, cataloged under National Stock Number 5307-00-513-3456, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-00-513-3456 |
| Item Name | Stud,shouldered and Stepped |
| FSC / FSG | 5307 / 53 — Studs |
| Status | ACTIVE |
| Cotter Pin Hole Diameter | 0.109 INCHES NOMINAL FIRST HOLE IN |
| Nut End Shank Diameter | 0.645 INCHES NOMINAL IN |
| Thread Length | 0.501 INCHES MINIMUM AND 0.561 INCHES MAXIMUM NUT THREAD IN |
| Thread Length | 0.574 INCHES MINIMUM AND 0.614 INCHES MAXIMUM STUD THREAD IN |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| Style Designator | SHOULDERED AND STEPPED |
| Material Document and Classification | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 0.750 INCHES STUD THREAD IN |
| Nominal Thread Size | 0.562 INCHES NUT THREAD IN |
| Shoulder Diameter | 0.765 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN |
| Stud End Shank Diameter | 0.480 INCHES NOMINAL IN |
| Nut End Shank Length | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN |
| Stud End Shank Length | 0.016 INCHES NOMINAL IN |
| Thread Class | 3A NUT THREAD A |
| Thread Class | 3A STUD THREAD A |
| Thread Quantity Per Inch | 18 NUT THREAD |
| Thread Quantity Per Inch | 16 STUD THREAD |
| Material | STEEL COMP 8740 |
| Shoulder Length | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN |
| Thread Series Designator | UNF STUD THREAD |
| Thread Series Designator | UNF NUT THREAD |
| Distance From Cotter Pin Hole Centerline to Nut End | 0.206 INCHES MINIMUM FIRST HOLE IN |
| Distance From Cotter Pin Hole Centerline to Nut End | 0.226 INCHES MAXIMUM SECOND HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 532303 | 5/9 Secondary reference Continental Aerospace Technologies, Inc. |
| 532303 | 3/9 Design control — primary reference Teledyne Industries Inc Teledyne Power Systems Div |
NSN 5307-00-513-3456 is a Stud,shouldered and Stepped, classified under FSC 5307, Studs. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5975-01-211-9127. Verify interchangeability with system specifications before substitution.
Key specifications for 5307-00-513-3456: Cotter Pin Hole Diameter: 0.109 INCHES NOMINAL FIRST HOLE IN; Nut End Shank Diameter: 0.645 INCHES NOMINAL IN; Thread Length: 0.501 INCHES MINIMUM AND 0.561 INCHES MAXIMUM NUT THREAD IN; Thread Length: 0.574 INCHES MINIMUM AND 0.614 INCHES MAXIMUM STUD THREAD IN. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.