The Stud,plain, cataloged under National Stock Number 5307-00-159-8204, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-00-159-8204 |
| Item Name | Stud,plain |
| FSC / FSG | 5307 / 53 — Studs |
| Status | ACTIVE |
| Thread Length | 1.750 INCHES MINIMUM STUD THREAD IN |
| Thread Length | 1.500 INCHES MINIMUM NUT THREAD IN |
| Hardness Rating | 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 1.125 INCHES STUD THREAD IN |
| Nominal Thread Size | 1.125 INCHES NUT THREAD IN |
| Thread Class | 3A NUT THREAD A |
| Thread Class | 3A STUD THREAD A |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 12 STUD THREAD |
| Thread Quantity Per Inch | 12 NUT THREAD |
| Thread Series Designator | UNF STUD THREAD |
| Thread Series Designator | UNF NUT THREAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| M87884-13 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5307-00-159-8204 is a Stud,plain, classified under FSC 5307, Studs. Status: active.
Key specifications for 5307-00-159-8204: Thread Length: 1.750 INCHES MINIMUM STUD THREAD IN; Thread Length: 1.500 INCHES MINIMUM NUT THREAD IN; Hardness Rating: 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM; Overall Length: 8.875 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.