The Stud,plain, cataloged under National Stock Number 5307-00-113-3303, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-00-113-3303 |
| Item Name | Stud,plain |
| FSC / FSG | 5307 / 53 — Studs |
| Status | ACTIVE |
| Thread Length | 0.375 INCHES MINIMUM STUD THREAD IN |
| Thread Length | 0.625 INCHES MINIMUM NUT THREAD IN |
| Thread Pitch Diameters | +0.2764 TO 0.3125 INCHES STUD THREAD IN |
| Thread Pitch Diameters | +0.2850 TO 0.3125 INCHES NUT THREAD IN |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 0.312 INCHES NUT THREAD IN |
| Surface Treatment | PASSIVATE OVERALL |
| Thread Quantity Per Inch | 24 NUT THREAD |
| Material | STEEL COMP 416 |
| Thread Series Designator | UNS NUT THREAD |
| Reference Number Differentiating Characteristics | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATIONAND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 701154 | 3/1 Design control — primary reference Dresser, Llc |
NSN 5307-00-113-3303 is a Stud,plain, classified under FSC 5307, Studs. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5342-01-147-6620. Verify interchangeability with system specifications before substitution.
Key specifications for 5307-00-113-3303: Thread Length: 0.375 INCHES MINIMUM STUD THREAD IN; Thread Length: 0.625 INCHES MINIMUM NUT THREAD IN; Thread Pitch Diameters: +0.2764 TO 0.3125 INCHES STUD THREAD IN; Thread Pitch Diameters: +0.2850 TO 0.3125 INCHES NUT THREAD IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.