The Stud,shouldered, cataloged under National Stock Number 5307-00-112-9939, is classified within Federal Supply Class 5307 (Studs) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5307-00-112-9939 |
| Item Name | Stud,shouldered |
| FSC / FSG | 5307 / 53 — Studs |
| Status | ACTIVE |
| Nut End Shank Diameter | 0.083 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN |
| Thread Length | 0.323 INCHES MINIMUM STUD THREAD IN |
| Thread Length | 0.422 INCHES MINIMUM NUT THREAD IN |
| Style Designator | SHOULDERED |
| Material Document and Classification | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Direction | RIGHT-HAND STUD THREAD |
| Thread Direction | RIGHT-HAND NUT THREAD |
| Nominal Thread Size | 0.112 INCHES NUT THREAD IN |
| Nominal Thread Size | 0.112 INCHES STUD THREAD IN |
| Stud End Shank Diameter | 0.083 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN |
| Nut End Shank Length | 0.047 INCHES NOMINAL IN |
| Stud End Shank Length | 0.045 INCHES NOMINAL IN |
| Thread Class | 2A STUD THREAD A |
| Thread Class | 2A NUT THREAD A |
| Thread Quantity Per Inch | 48 STUD THREAD |
| Thread Quantity Per Inch | 48 NUT THREAD |
| Material | STEEL COMP 303SE |
| Distance Across Flats | 0.188 INCHES NOMINAL IN |
| Shoulder Length | 0.063 INCHES NOMINAL IN |
| Thread Series Designator | UNF STUD THREAD |
| Thread Series Designator | UNF NUT THREAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 8948271P014 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5307-00-112-9939 is a Stud,shouldered, classified under FSC 5307, Studs. Status: active.
Key specifications for 5307-00-112-9939: Nut End Shank Diameter: 0.083 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN; Thread Length: 0.323 INCHES MINIMUM STUD THREAD IN; Thread Length: 0.422 INCHES MINIMUM NUT THREAD IN; Style Designator: SHOULDERED. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.