The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-723-9325, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Jet-Tek, Llc Dba Jet-Tek. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-723-9325 |
| Primary Part Number | EN6115V4-12 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Jet-Tek, Llc Dba Jet-Tek |
| Status | ACTIVE |
| Head Height | 2.03 MILLIMETERS MINIMUM AND 2.28 MILLIMETERS MAXIMUM MM |
| Fastener Length | 27.18 MILLIMETERS MINIMUM AND 27.43 MILLIMETERS MAXIMUM MM |
| Nominal Thread Diameter | 0.2500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Point Style | FLAT |
| Grip Diameter | 6.312 MILLIMETERS MINIMUM AND 6.337 MILLIMETERS MAXIMUM MM |
| Chamfer Angle | 45.0 DEGREES NOMINAL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28.0 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 10.54 MILLIMETERS MINIMUM AND 11.17 MILLIMETERS MAXIMUM MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| EN6115V4-12 | Asd-Stan (BEL) |
| EN6115V4-12 PRIMARY | Jet-Tek, Llc Dba Jet-Tek (USA) |
NSN 5306-01-723-9325 is a Bolt,close Tolerance, manufactured by Jet-Tek, Llc Dba Jet-Tek, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-723-9325 has 2 manufacturer part numbers on file: EN6115V4-12 (Asd-Stan), EN6115V4-12 (Jet-Tek, Llc Dba Jet-Tek).
Key specifications for EN6115V4-12: Head Height: 2.03 MILLIMETERS MINIMUM AND 2.28 MILLIMETERS MAXIMUM MM; Fastener Length: 27.18 MILLIMETERS MINIMUM AND 27.43 MILLIMETERS MAXIMUM MM; Nominal Thread Diameter: 0.2500 INCHES IN; Head Style: FLAT CHAMFER. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.