The Bolt,shear, cataloged under National Stock Number 5306-01-708-6108, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-708-6108 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN |
| Head Height | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN |
| Fastener Length | 1.323 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| Extended Washer Diameter | 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN |
| Thread Length | 0.625 INCHES MINIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS6382 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6415 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6484 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6484 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6322 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6325 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6327 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.3750 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS-21250 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| Width Between Flats | 0.4375 INCHES NOMINAL IN |
| Grip Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 17100 POUNDS PER SQUARE INCH LBS |
| Chamfer Angle | 30.0 DEGREES NOMINAL AND 45.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.422 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21250-06011 | 3/2 Design control — primary reference U.S. Government activity |
| NASM21250 REV 2 | D/9 Drawing number reference only U.S. Government activity |
NSN 5306-01-708-6108 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5306-01-708-6158. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-01-708-6108: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN; Head Height: 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.