The Bolt,shear, cataloged under National Stock Number 5306-01-707-4435, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-707-4435 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Head Height | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN |
| Fastener Length | 2.558 INCHES MINIMUM AND 2.588 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS2700, METHOD 1, TYPE 2 OR TYPE 8, CLASS 4 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| Extended Washer Diameter | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM IN |
| Thread Length | 1.173 INCHES MINIMUM IN |
| Material Document and Classification | AMS5662 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5663 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5962 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.7500 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS-14181 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.797 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN |
| Grip Diameter | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Chamfer Angle | 30.0 DEGREES NOMINAL AND 45.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM14181 REV 7 | D/9 Drawing number reference only U.S. Government activity |
| MS14181-12022L | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-707-4435 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5306-01-707-4439. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-01-707-4435: Extended Washer Thickness: 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN; Head Height: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN; Fastener Length: 2.558 INCHES MINIMUM AND 2.588 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS2700, METHOD 1, TYPE 2 OR TYPE 8, CLASS 4 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.