Bolt, Shear5306-01-707-4415

NSN 5306-01-707-4415 · NIIN 017074415

FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives

Government record, cited

Also searched as 5306-01-707-4415 · 5306017074415 · NIIN 017074415 · 01-707-4415 · FSC 5306 Bolts · MS14181-05013P · NASM14181 REV 7

Nearby stock numbers ← 5306-01-707-4364 Bolt, Externally Relieved Body · 5306-01-707-4416 Bolt, Shear →

5306-01-707-4415 — Bolts

Features

Bolt,shear — FSC 5306
Extended Washer Thickness: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
Head Height: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
Fastener Length: 1.412 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
Surface Treatment Document and Classification: AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
Extended Washer Diameter: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
Thread Length: 0.589 INCHES MINIMUM IN
Material Document and Classification: AMS5662 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5663 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5962 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL

Identification

NSN: 5306-01-707-4415
NIIN: 017074415
FSC: 5306 — Bolts
FSG: 53 — Hardware and Abrasives

General Description

The Bolt,shear, cataloged under National Stock Number 5306-01-707-4415, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 6 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications

Parameter	Value
NSN	5306-01-707-4415
Item Name	Bolt,shear
FSC / FSG	5306 / 53 — Bolts
Status	ACTIVE
Extended Washer Thickness	0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
Head Height	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
Fastener Length	1.412 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
Surface Treatment Document and Classification	AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
Extended Washer Diameter	0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
Thread Length	0.589 INCHES MINIMUM IN
Material Document and Classification	AMS5662 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5663 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS5962 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL
Nominal Thread Diameter	0.3125 INCHES IN
Head Style	SPLINE EXTENDED WASHER
Thread Direction	RIGHT-HAND
Specification/standard Data	80205-NAS-14181 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length	0.803 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
Head Minor Diameter	0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Grip Diameter	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Surface Treatment	CADMIUM OVERALL
Minimum Tensile Strength	220000 POUNDS PER SQUARE INCH LBS
Chamfer Angle	30.0 DEGREES NOMINAL AND 45.0 DEGREES NOMINAL
Thread Class	3A A
Thread Quantity Per Inch	24
Material	NICKEL ALLOY 718 OVERALL
Thread Series Designator	UNIFIED NATIONAL JOINT FINE (UNJF)

Lifecycle & Compliance

Acquisition Status	ACTIVE
DEMIL Code	DEMIL A — No Demilitarization Required
Hazard	No hazard code in the DLA record (HMIC N)
Criticality Code	X

⇄ Related Items 6

Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.

5306-01-707-4416MS14181-05020P POSSIBLE MATCH

BOLT,SHEAR