The Bolt,shear, cataloged under National Stock Number 5306-01-706-2699, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-706-2699 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN |
| Head Height | 0.375 INCHES NOMINAL IN |
| Fastener Length | 2.233 INCHES NOMINAL IN |
| Extended Washer Diameter | 0.561 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN |
| Thread Length | 0.733 INCHES NOMINAL IN |
| Material Document and Classification | AMS5662 FED SPEC SINGLE MATERIAL RESPONSE OR AMS5962 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.4375 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Handle Diameter | 0.4356 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30US7K24Z | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-706-2699 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-706-2699: Extended Washer Thickness: 0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN; Head Height: 0.375 INCHES NOMINAL IN; Fastener Length: 2.233 INCHES NOMINAL IN; Extended Washer Diameter: 0.561 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.