The Bolt,shear, cataloged under National Stock Number 5306-01-705-6686, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-705-6686 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN |
| Fastener Length | 3.794 INCHES MINIMUM AND 3.824 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416, TY II, CL 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.184 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM OVERALL IN |
| Hole Configuration Style | HEXAGON CORNERS |
| Material Document and Classification | AMS 6349 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6484 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6325 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6327 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.8750 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN |
| Width Between Flats | 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN |
| Grip Diameter | 0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 14 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 3.537 INCHES MINIMUM AND 3.667 INCHES MAXIMUM OVERALL IN |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6614DH-42 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-705-6686 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-705-6686: Head Height: 0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN; Fastener Length: 3.794 INCHES MINIMUM AND 3.824 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS-QQ-P-416, TY II, CL 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 1.184 INCHES NOMINAL IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.