The Bolt,shear, cataloged under National Stock Number 5306-01-700-7002, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-700-7002 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN |
| Head Height | 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Fastener Length | 1.065 INCHES MINIMUM AND 1.095 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| Extended Washer Diameter | 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN |
| Thread Length | 0.368 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN |
| Material Document and Classification | AMS6382 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OR AMS6415 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS-21134 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.173 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 3910 POUNDS PER SQUARE INCH LBS |
| Chamfer Angle | 30.0 DEGREES NOMINAL AND 45.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21134-03011 | 3/2 Design control — primary reference U.S. Government activity |
| NASM21134 REV 2 | D/9 Drawing number reference only U.S. Government activity |
NSN 5306-01-700-7002 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-700-7002: Extended Washer Thickness: 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN; Head Height: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN; Fastener Length: 1.065 INCHES MINIMUM AND 1.095 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.