The Bolt,shear, cataloged under National Stock Number 5306-01-693-1102, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-693-1102 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN |
| Head Height | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| Fastener Length | 2.032 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Thread Length | 0.485 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.480 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN |
| Width Between Flats | 0.306 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 4140 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS624-25 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-693-1102 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-693-1102: Extended Washer Thickness: 0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN; Head Height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN; Fastener Length: 2.032 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN; Extended Washer Diameter: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.