The Bolt,shear, cataloged under National Stock Number 5306-01-677-0013, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-677-0013 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.123 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN |
| Head Height | 0.547 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN |
| Fastener Length | 4.201 INCHES NOMINAL IN |
| Extended Washer Diameter | 0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN |
| Thread Length | 0.826 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.5625 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM IN |
| Width Between Flats | 0.619 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN |
| Grip Diameter | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP E4340 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 4140 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.055 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS629H54 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-677-0013 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-677-0013: Extended Washer Thickness: 0.123 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN; Head Height: 0.547 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN; Fastener Length: 4.201 INCHES NOMINAL IN; Extended Washer Diameter: 0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.