The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-627-0363, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-627-0363 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Fastener Length | 3.914 INCHES MINIMUM AND 3.934 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.534 INCHES NOMINAL IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.3750 INCHES IN |
| Head Style | CROWNED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.375 INCHES MINIMUM AND 3.390 INCHES MAXIMUM IN |
| Width Between Flats | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN |
| Grip Diameter | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS27576-6-54 | 5/9 Secondary reference U.S. Government activity |
| MS27576-6-54 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-627-0363 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-627-0363: Head Height: 0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN; Fastener Length: 3.914 INCHES MINIMUM AND 3.934 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.534 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.