The Bolt,shear, cataloged under National Stock Number 5306-01-626-1024, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-626-1024 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Head Height | 0.265 INCHES NOMINAL IN |
| Fastener Length | 0.857 INCHES NOMINAL IN |
| Extended Washer Diameter | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN |
| Thread Length | 0.420 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.437 INCHES NOMINAL IN |
| Width Between Flats | 0.250 INCHES NOMINAL IN |
| Grip Diameter | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21250-03007 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-626-1024 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-626-1024: Extended Washer Thickness: 0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN; Head Height: 0.265 INCHES NOMINAL IN; Fastener Length: 0.857 INCHES NOMINAL IN; Extended Washer Diameter: 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.