The Bolt,shear, cataloged under National Stock Number 5306-01-625-6044, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-625-6044 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Head Height | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Fastener Length | 2.020 INCHES NOMINAL IN |
| Extended Washer Diameter | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS4008 MANUFACTURERS SPECIFICATION AND 80205-NAS-14181 MANUFACTURERS STANDARD |
| Grip Length | 1.49 INCHES MINIMUM AND 1.51 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Grip Diameter | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE FASTENER |
| Minimum Tensile Strength | 10080 POUNDS PER SQUARE INCH LBS |
| Material | NICKEL ALLOY 718 FASTENER |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS14181-04024L | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-625-6044 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-625-6044: Extended Washer Thickness: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN; Head Height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Fastener Length: 2.020 INCHES NOMINAL IN; Extended Washer Diameter: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.