The Bolt,assembled Sleeve, cataloged under National Stock Number 5306-01-620-7319, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-620-7319 |
| Item Name | Bolt,assembled Sleeve |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.035 INCHES MINIMUM AND 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM0.055 INCHES MAXIMUM IN |
| Fastener Length | 0.6735 INCHES NOMINAL0.6735 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.4375 INCHES NOMINAL0.4375 INCHES NOMINAL IN |
| Material Document and Classification | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6325 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6327 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.164 INCHES0.164 INCHES IN |
| Head Style | FLAT FILLISTERFLAT FILLISTER |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 3B3B |
| Thread Quantity Per Inch | 3232 |
| Material | STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.315 INCHES MINIMUM AND 0.315 INCHES MINIMUM AND 0.335 INCHES MAXIMUM0.335 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1910-4-5 | 5/1 Secondary reference U.S. Government activity |
| BACF34D4P5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-620-7319 is a Bolt,assembled Sleeve, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-620-7319: Head Height: 0.035 INCHES MINIMUM AND 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM0.055 INCHES MAXIMUM IN; Fastener Length: 0.6735 INCHES NOMINAL0.6735 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.4375 INCHES NOMINAL0.4375 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.