The Bolt,shear, cataloged under National Stock Number 5306-01-616-0948, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-616-0948 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Fastener Length | 0.917 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN |
| Thread Length | 0.370 INCHES NOMINAL IN |
| Hole Configuration Style | HEXAGON CORNERS |
| Material Document and Classification | AMS4928 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS4967 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE FASTENER |
| Material Document and Classification | MIL-DTL-18240 AND QPL-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE |
| Nominal Thread Diameter | 0.2500 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS6403 THRU 6420 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN |
| Width Between Flats | 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN |
| Locking Feature | PATCH OR PELLET OR STRIP LOCKING FEATURE |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Chamfer Angle | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | PLASTIC NYLON LOCKING FEATURE |
| Material | TITANIUM ALLOY UNS R56400 FASTENER |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6404U9X | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-616-0948 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-616-0948: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN; Fastener Length: 0.917 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.