The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-603-7815, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-603-7815 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Point Diameter | 0.550 INCHES MINIMUM AND 0.555 INCHES MAXIMUM IN |
| Head Height | 0.281 INCHES NOMINAL IN |
| Point Length | 0.068 INCHES MAXIMUM IN |
| Fastener Length | 2.719 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416, TYPE II, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.594 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.5625 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Grip Length | 2.1875 INCHES NOMINAL IN |
| Width Between Flats | 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN |
| Grip Diameter | 0.5917 INCHES MINIMUM AND 0.5927 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Chamfer Angle | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6209-35Y | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-603-7815 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-603-7815: Point Diameter: 0.550 INCHES MINIMUM AND 0.555 INCHES MAXIMUM IN; Head Height: 0.281 INCHES NOMINAL IN; Point Length: 0.068 INCHES MAXIMUM IN; Fastener Length: 2.719 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.