The Bolt,shear, cataloged under National Stock Number 5306-01-600-3167, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-600-3167 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.188 INCHES NOMINAL IN |
| Fastener Length | 0.684 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.578 INCHES NOMINAL IN |
| Hole Configuration Style | ROUND |
| Material Document and Classification | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.054 INCHES NOMINAL IN |
| Width Between Flats | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN |
| Grip Diameter | 0.3885 INCHES MINIMUM AND 0.3891 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | IRON ALLOY 660 OVERALL |
| Hole Quantity | 13 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.106 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30LM6D17 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-600-3167 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-600-3167: Head Height: 0.188 INCHES NOMINAL IN; Fastener Length: 0.684 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.578 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.