The Bolt,shear, cataloged under National Stock Number 5306-01-597-0698, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-597-0698 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.083 INCHES NOMINAL IN |
| Fastener Length | 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | BMS10-85, TYPE I ASSN STD SINGLE TREATMENT RESPONSE HEAD |
| Thread Length | 0.345 INCHES NOMINAL IN |
| Material Document and Classification | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE HEAD |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FILLISTER COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.375 INCHES NOMINAL IN |
| Grip Diameter | 0.1881 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM HEAD |
| Minimum Tensile Strength | 95000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL CORROSION RESISTING HEAD |
| Material | PLASTIC POLYAMIDE NYLON LOCKING FEATURE |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.337 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30LH3K6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-597-0698 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-597-0698: Head Height: 0.083 INCHES NOMINAL IN; Fastener Length: 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN; Surface Treatment Document and Classification: BMS10-85, TYPE I ASSN STD SINGLE TREATMENT RESPONSE HEAD; Thread Length: 0.345 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.