The Bolt,shear, cataloged under National Stock Number 5306-01-554-8570, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-554-8570 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Head Height | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Fastener Length | 1.807 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN |
| Thread Length | 0.495 INCHES NOMINAL IN |
| Material Document and Classification | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.312 INCHES NOMINAL IN |
| Head Minor Diameter | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS14181-04021L | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-554-8570 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-554-8570: Extended Washer Thickness: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN; Head Height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Fastener Length: 1.807 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.