The Bolt,shear, cataloged under National Stock Number 5306-01-482-9487, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-482-9487 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN |
| Fastener Length | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | 11-416 TY1CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.375 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1105 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.125 INCHES NOMINAL IN |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 7240 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1105-18W | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-482-9487 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-482-9487: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN; Fastener Length: 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN; Surface Treatment Document and Classification: 11-416 TY1CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.