The Bolt,shear, cataloged under National Stock Number 5306-01-477-7807, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-477-7807 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN |
| Fastener Length | 1.923 INCHES MINIMUM AND 1.953 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.438 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Hole Configuration Style | HEXAGON CORNERS |
| Material Document and Classification | AMS 6349 ASSN STD 1ST MATERIAL RESPONSE OR AMS6484 ASSN STD 2ND MATERIAL RESPONSE OR AMS 6415 ASSN STD 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.756 INCHES NOMINAL FIRST HOLE IN |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS6205-24DH | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-477-7807 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-477-7807: Head Height: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN; Fastener Length: 1.923 INCHES MINIMUM AND 1.953 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.438 INCHES NOMINAL IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.