The Bolt,shear, cataloged under National Stock Number 5306-01-463-6317, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 9 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-463-6317 |
| Primary Part Number | X385-4H17 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Extended Washer Thickness | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Head Height | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Fastener Length | 1.493 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Thread Length | 0.446 INCHES NOMINAL IN |
| Hole Configuration Style | DOUBLE HEXAGON LONGITUDINAL HOLE |
| Material Document and Classification | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.318 INCHES NOMINAL IN |
| Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | NICKEL ALLOY 718 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| X385-4H17 | Huck International, Inc (USA) |
| 03A100-4H17 | Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems (USA) |
| 03A100-4H17 | Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems (USA) |
| AIC1655-4H17 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| SII1185-5H17 | Sonic Industries, Inc. Dba Sonic Industries Inc Div Sonic Industries (USA) |
| MB211-4H17 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| VCG0017-4H17 | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| MB211-4H17 | Hi-Shear Corporation (USA) |
| PBF1422-4H17 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| 123711-4H17 | 5/2 Secondary reference U.S. Government activity |
| VS3320-4H17 | 3/2 Design control — primary reference U.S. Government activity |
| X385-4H17 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-01-463-6317 is a Bolt,shear, manufactured by Huck International, Inc, classified under FSC 5306, Bolts. Status: active.
NSN 5306-01-463-6317 has 9 manufacturer part numbers on file: X385-4H17 (Huck International, Inc), 03A100-4H17 (Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems), 03A100-4H17 (Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems), AIC1655-4H17 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), SII1185-5H17 (Sonic Industries, Inc. Dba Sonic Industries Inc Div Sonic Industries) and 4 more.
Key specifications for X385-4H17: Extended Washer Thickness: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN; Head Height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Fastener Length: 1.493 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.