The Bolt,shear, cataloged under National Stock Number 5306-01-461-0289, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-461-0289 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Head Height | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Fastener Length | 0.839 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN |
| Thread Length | 0.589 INCHES MINIMUM IN |
| Hole Configuration Style | SPLINE |
| Nominal Thread Diameter | 0.3125 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 16000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS12297H05004 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-461-0289 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-461-0289: Extended Washer Thickness: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN; Head Height: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN; Fastener Length: 0.839 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN; Extended Washer Diameter: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.