The Bolt,close Tolerance, cataloged under National Stock Number 5306-01-422-8600, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-422-8600 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Fastener Length | 1.974 INCHES MINIMUM AND 2.004 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | DPS 9.74, TYPE 1 CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE THREADS |
| Surface Treatment Document and Classification | DPS 9.74, TYPE 1, CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE HEAD |
| Surface Treatment Document and Classification | DPS 9.84, TYPE 1, CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE GRIP |
| Surface Treatment Document and Classification | DPS 9.84, TYPE 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD |
| Thread Length | 0.864 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM THREADS IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM THREADS |
| Surface Treatment | CHROMIUM GRIP |
| Surface Treatment | CADMIUM HEAD |
| Surface Treatment | CHROMIUM BEARING SURFACE OF HEAD |
| Minimum Tensile Strength | 95000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.819 INCHES NOMINAL THREADS IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| S4928913-4-18 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-422-8600 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-422-8600: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.