The Bolt,shear, cataloged under National Stock Number 5306-01-417-3775, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-417-3775 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| Head Height | 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN |
| Fastener Length | 1.159 INCHES MINIMUM AND 1.189 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837, TYPE 2 CLASS 2 MIL SPEC ALL TREATMENT RESPONSES OVERALL |
| Extended Washer Diameter | 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM IN |
| Thread Length | 0.659 INCHES MINIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | SPLINE |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Grip Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21297H06008 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-01-417-3775 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-417-3775: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; Head Height: 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.