The Bolt,shear, cataloged under National Stock Number 5306-01-417-2436, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-417-2436 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Head Height | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN |
| Fastener Length | 4.563 INCHES MINIMUM AND 4.593 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE 2, CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Extended Washer Diameter | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM IN |
| Thread Length | 1.063 INCHES MINIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.797 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN |
| Grip Diameter | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21134-12056 | 3/2 Design control — primary reference U.S. Government activity |
| MS21134-12056 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-01-417-2436 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-417-2436: Extended Washer Thickness: 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN; Head Height: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN; Fastener Length: 4.563 INCHES MINIMUM AND 4.593 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416, TYPE 2, CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.