The Bolt,shear, cataloged under National Stock Number 5306-01-366-5315, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-366-5315 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Extended Washer Thickness | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Head Height | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Fastener Length | 3.166 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-C-8837 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN |
| Thread Length | 0.579 INCHES MINIMUM AND 0.629 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | SPLINE EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.552 INCHES MINIMUM AND 2.572 INCHES MAXIMUM IN |
| Head Minor Diameter | 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21297-05041 | 5/9 Secondary reference U.S. Government activity |
| MS21297-05041 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-366-5315 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-366-5315: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Extended Washer Thickness: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN; Head Height: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN; Fastener Length: 3.166 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.