The Bolt,internal Wrenching, cataloged under National Stock Number 5306-01-362-7253, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-01-362-7253 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Width Across Flats | 0.563 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN |
| Head Height | 0.595 INCHES NOMINAL IN |
| Fastener Length | 2.860 INCHES MINIMUM AND 2.890 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ+416,TY2CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.750 INCHES NOMINAL IN |
| Hole Configuration Style | ROUND INTERNAL HEXAGON |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | BEVEL-CONICAL |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL OVERALL |
| Hole Quantity | 6 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Head Diameter | 0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS150DH-46 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-01-362-7253 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-01-362-7253: Width Across Flats: 0.563 INCHES MINIMUM AND 0.566 INCHES MAXIMUM IN; Head Height: 0.595 INCHES NOMINAL IN; Fastener Length: 2.860 INCHES MINIMUM AND 2.890 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ+416,TY2CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.